The 250x1200 fine jaw crusher is also a type of jaw crusher, which belongs to the PEX series, and is more suitable for secondary crushing and fine crushing, because their tooth plates are finer and denser. And compared with ordinary jaw crushers, its feed particle size is smaller and the finished product is relatively fine in size. The technical parameters of the 250x1200 fine jaw crusher, such as output, weight, and motor power, have been sorted out here.
The processing capacity is 20-61 tons per hour. The 250x1200 model belongs to small equipment, which may not be as high as large equipment, but the work efficiency is not low, and it can meet the needs. It can be used to crush various ores and rocks with a compressive strength of 147-245MPa. The actual output depends on different materials and feed materials. Depending on factors such as granularity, the results will vary.
Because of the extrusion crushing method, the crushing chamber is composed of two jaw plates, the movable jaw plate and the static jaw plate, and the material crushing operation is completed by simulating the movement of the two jaws of animals. Moreover, the V-shaped crushing chamber is deep and has no dead zone. The upper part can start crushing, which improves the feeding capacity and output. If there is a demand for higher output, you can also choose to configure two or four equipment for joint operation, and the overall effect will be better.
8.5 tons. The fine jaw crusher is mainly composed of fixed jaw plate, movable jaw plate, frame, upper and lower guard plates, adjustment seat, movable jaw pull rod, etc. Reasonable design structure brings about fewer components, light weight, easy parts replacement and maintenance. At the same time, the installation and transportation are convenient, and the operation cost is low.
In addition to various technical parameters, the price of a 250x1200 fine jaw crusher is also a point of concern to everyone. Because there is no exact quotation in the market at present, it is generally around thousands USD dollars and there are many factors that are affected, such as the manufacturer's production technology, materials, quality, etc., so it must be determined after a comprehensive comparison.
The specific price can be directly consulted online, and the quality of CFTC equipment is guaranteed. It is made of high manganese steel and diamond alloy materials. It has also been improving and upgrading the equipment according to the needs of users and actual production conditions, so the choice is more assured. , there are many other models to choose from.
Please write what you need,we will contact you asap !our email:[email protected]