Coal mineral sizerQuick Details
Coal mineral sizer Overview:
FP Coal mineral sizer is mainly crushing the coal for the primary and secondary crushing in the industries of coal mining, power generation station, coal washing plant, metallurgy,etc. If the crushing system adopting the device of iron and wood removal, the raw coal do not need sieving, but directly crushing, by which it will simplify the coal crushing process, reduce the factory height, reduce the building cost and producing cost for coal handling plant and coal power plant.
Coal mineral sizer Features:
1.High shearing torque, suitable to crush the big block material and ores, the biggest feeding size is up to 1800mm.
2.Big capacity. The capacity could up to 20000t/h. And no fine powder product.
3.Big discharged open, material discharged easily, suitable to crush all dry, wet, sticky
4.Easy operation and simply maintenance: it is simple to change the tooth plate and tooth rings. It is convenient to lubricate and maintenance.
5.Low energy consumption: the energy consumption of FP mineral sizer is 0.21—0.45kw.h/t, while jaw crusher 0.46—1.5 kw.h/t, impact crusher 0.94—1.27 kw.h/t,ring hammer crusher 0.86—1.24 kw.h/t.
Coal mineral sizer Working Principle :
The FP series mineral sizer crushed the ores and materials by the combined action of shearing, bending and splitting. Because of adopting low rotation speed and special tooth pattern (the crushed tooth of mineral sizer is arranged in spiral pattern, strong ability to hold the big material block.), the size smaller than the expecting will be quickly discharged from the tooth gap, without crushed, the powder and fine finished product is little. FP mineral sizer has got the right of use for coal mine underground safety signs, so it could be installed and operated in the pit.
|FP100and above series||FP100/150||FP100/200||FP100/300||FP130|
Note: The capacity may vary with different materials and feeding sizes.