Quicklime is actually limestone, which plays an important role in the chemical industry. The raw materials of quicklime are different in size and cannot be directly used in construction and production. Therefore, they need to be crushed. The finished quicklime of different particle sizes also have different uses. What equipment is used for crushing quicklime ? What is the output per hour, based on these questions inquired by customers, simple analysis has been made in this article makes. There are many crushers on the market that can be used to crush quicklime, but here are two recommended for you, heavy hammer crusher and hammer crusher.

Heavy Hammer Crusher - HYPCD Type

The heavy hammer crusher has a relatively large volume and a square base design. It has three impact zones. During material crushing, the three crushing impact zones integrate crushing, shaping and forming into one, so that the finished stone after crushing has clear specifications and grain size. The sieve has a better shape, so it is more suitable for crushing quicklime materials. At the same time, the improved sieve plate in the discharge design can greatly reduce the frictional resistance of material filtration, and the feeding frequency can be adjusted according to the operation requirements, thereby increasing the output. The wear parts are made of wear-resistant materials, and a small number of wear-resistant parts are made of extra-hard wear-resistant materials, which have a long service life and greatly reduce maintenance and maintenance costs.

Hammer Crusher-PC Type

Compared with the heavy hammer crusher, this type of quicklime crushing equipment belongs to the small hammer crusher. The ore is beaten at high speed by the hammer head, and the ore has great speed and kinetic energy in an instant. In order to prevent the wear of the frame, the inner wall of the frame is made of manganese steel as the lining plate, and the strike plate is made of high-manganese steel for casting and quenching after strengthening treatment, which ensures the superior wear resistance and impact resistance of the lining plate and the strike plate, and also has the good granularity and shape of the finished product. Well, this type of equipment is suitable for the needs of small gravel quarries. One hour output of crushing quicklime equipment The hammer crushers used for crushing quicklimestone equipment include large hammer crushers and small hammer crushers. These two types of equipment are naturally different in terms of production capacity, such as: Large hammer crusher - HYPCD heavy hammer crusher, the hourly output of this series can reach 4000 tons, while the PC hammer crusher can reach 95 tons per hour. Therefore, in terms of production capacity, if your production demand is more than 100 tons, Then it is more suitable to choose HYPCD hammer crusher. If your output demand is relatively small, and the output is less than 100 tons per hour, it is more suitable to choose a small hammer crusher.