Silica is the general term for vein quartz, quartzite, and quartz sandstone. It is mainly divided into crystalline silica, cemented silica, vein quartz, etc. The appearance of crystalline silica is generally milky white, gray-white, light yellow and reddish-brown, with bright luster, smooth and continuous section, and sharp edges and corners, hardness, strength They are all very large. The appearance of cemented silica is white, gray-white, yellow-gray, black, red, etc., and the section is dense, shell-shaped, without obvious granular structure and the sharp edges of the section are not obvious, and there is almost no luster. Silica has a wide range of uses, mainly used in acid refractory bricks in the metallurgical industry, and because the chemical and physical properties of silica are very stable, after processing, it meets the standards for construction sand and can be used as natural sand in buildings, roads, hydropower used in many industries.
Raw material → vibrating feeder → jaw crusher → cone crusher → impact crusher (optional) → vibrating screen → conveyor The silica is firstly sent to the jaw crusher through the vibrating feeder for coarse crushing, and then into the cone crusher for fine crushing. For fine-grained crushing, the discharge particle size can be adjusted according to production needs to obtain the desired finished product.
According to the above process of silica processing production line, the commonly used crushers for crushing silica include three types which are jaw crusher, cone crusher and impact crusher. The following will introduce their suitability with silica one by one.
The jaw crusher is mainly used for the first crushing and coarse crushing in the sand and gravel production line. It can meet the crushing of various materials with a particle size of no more than 1200mm, a compressive strength of no more than 320MPa, and a discharge particle size of 10-350mm. The jaw crusher has a large crushing ratio and strong crushing capacity. The "V"-shaped deep cavity and curved extrusion make the material fully stressed in the crushing cavity and the product particle size is uniform.
Common medium and fine crushing equipment includes cone crusher and impact crusher. Since the hardness and strength of silica are relatively large, its hardness can reach level 7, and its compressive strength is also about 200-300Mpa, so it is more suitable for lamination crushing. Cone crusher with principle operation, high wear resistance material, strong wear resistance and low failure rate.
The VSI crusher is also known as the vertical shaft impact sand making machine, which is mainly used for three-stage sand making and shaping, and mainly adopts the working principle of "stone hitting stone" and "stone hitting iron". The machine can combine the two principles, which can not only make sand, but also shape, greatly improve the quality of the finished product. And it is environmentally friendly.
In fact, there is no need to worry about the profitability of silica sand making. The protection of natural sand mining and the continuous development of infrastructure results in the continuous gap expansion between the supply and demand of sand and gravel. So that the current sand and gravel prices show a steady and continuous upward trend. Of course, different scales of production lines and different demand in different regions will have a corresponding impact on profitability, and corresponding investigations need to be done in the investment.
Please write what you need,we will contact you asap!Our email:[email protected]