The machine-made sand production line with an output of 200 tons per hour is a medium scale, which is a relatively common output configuration. It is neither like a large-scale production line, which has too high initial investment costs and slightly high risks, nor is it like a small-scale sand and gravel production line, which has small profits and low returns. Undoubtedly, it has become the preferred option of many customers, so how to configure the production of 200 tons of machine-made sand and gravel per hour? How many configuration methods are there? What equipment do you need to use?

Configuration of 200 tons per hour machine-made sand production line

Production line configuration for medium and below hardness materials
Mohs hardness: ≤5
Representative materials: limestone, calcite, feldspar, quartz, etc.
Equipment recommendation: jaw crusher + impact crusher
The jaw crusher can deal with the coarse crushing of large materials. It adopts the principle of extrusion and crushing. The movable jaw and the static jaw form a "V"-shaped crushing cavity. The large materials are swallowed and crushed like a tiger chewing. The stability of the whole machine is good and the crushing ratio is large. The impact crusher adopts the principle of impact crushing. The material is repeatedly crushed and ground in the crushing chamber, and the finished product has a good particle shape and uniform particle size. It is a fixed old partner with the jaw crusher, and is mainly used for fine crushing of stone materials.
Configuration solution (take limestone as an example)
Feed particle size: ≤50mm
Finished product specifications: 0-5mm, 5-10mm, 10-20mm, 20-30mm
Equipment configuration: raw material warehouse, vibrating feeder, PE750*1060 jaw crusher, PF1315 impact crusher, 4YK246 vibrating screen, several conveyors
Rigid material processing production line configuration
Mohs hardness: 5-16
Representative materials: granite, basalt, marble, pebbles, etc.
Equipment recommendation: jaw crusher + cone crusher

Similarly, the jaw crusher performs primary crushing of bulk materials, and the cone crusher is matched with it for secondary crushing. The overall wear resistance of the cone crusher is good, the failure rate is low, and the principle of lamination crushing also makes it very suitable for hard materials. Compared with the impact crusher, although the initial investment cost is higher, the durability of the whole machine is strong, and the later investment will be reduced. Configuration solution (take granite as an example)
Feed size: ≤800mm
Finished product specifications: 0-5mm, 5-10mm, 10-30mm

Equipment configuration: raw material warehouse, vibrating feeder, PE750*1060 jaw crusher, HPS400 cone crusher, 3YK2870 vibrating screen, XS3020 sand washing machine How much does it cost to build a sand and gravel production line with an output of 200 tons per hour?

The above are only two production lines with an output of 200 tons per hour configured from the material properties. If you look at the type of production line, you can configure a mobile production line. From the perspective of capital, you can choose a heavy hammer crusher for operation. Moreover, the equipment that can meet the production of 200 tons per hour of machine-made sand is not the only one, there are many models to choose from. Therefore, to know how much it will cost to build a sand and gravel production line, you need to consult the manufacturer directly online.

CFTC machine manufacturers provide EPC general contracting services, including pre-production line design, site planning, infrastructure assistance, equipment installation and commissioning, operation training, etc. Don't hesitate, we will tailor a plan and quote for you.