Calcite is classified as a carbonate mineral. It has a Mohs hardness of 3 and is mostly white or colorless. It is the main mineral of limestone and marble. Toothpaste, medicine and cables cannot be separated from it. Its processing is usually crushing, sand making and milling. Generally, crushing can make5-20mm particle size. This article will give answers to the above questions. Different types of calcite crusher with a discharge of 10mm and an output of 120 tons per hour Unprocessed calcite is a massive crystalline mineral. It needs to be crushed and processed before it can be used in the next step. First, a crusher for pre-ore processing is required. Jaw crushers and hammer crushers can be selected. If calcite powder is needed in the later stage, choose a hammer crusher, which has a higher crushing fineness, which is conducive to the later grinding work.

1. Jaw crusher

[Output]: 1~1000t/h

[Discharge]: 10~350mm

a. The gasket type discharge opening adjustment device of the jaw crusher is reliable and convenient, with a large adjustment range, which increases the flexibility of the equipment.

b. The crushing cavity is deep and there is no dead zone, which improves the feeding capacity and output.

c. Low energy consumption, energy saving and environmental protection, which helps to achieve the goal of "more crushing and less grinding".

d. Equipped with dust-proof and noise-reduction device, so that there is no dust pollution during the operation of the equipment.

2. Heavy hammer crusher

[Output]: 80~3000t/h

[Discharge]: The gap between the grate bars can be adjusted according to user requirements

a. The wearing parts are made of high-hardness alloy to slow down the wear rate, the discharged sand and stone have higher quality, and the effective service life is longer.

b. The whole equipment can be crushed for a long time, and the normal operation cycle time is long, which reduces the downtime and guarantees the output and efficiency of the equipment.

c. Compared with the high price of other types of equipment, the hammer crusher has high output and low later operating cost. It can be described as a high-quality and low-cost "gold-absorbing" equipment.

Can CFTC calcite crusher be exported?

Other manufacturers dare not say, but CFTC company can realize the export of equipment.

CFTC's intended users are distributed in a wide range of regions, and many of them have foreign demand users. In this regard, the company has established a special foreign trade department to facilitate communication and equipment handling related matters. Therefore, users with export intentions do not need to hesitate, just consult the manual customer service, you can get the details of the equipment export and the production process. Summary

According to the processing needs of different users, it is necessary to configure appropriate crushing equipment for calcite powder to ensure that the construction is completed on time without causing waste of production capacity. Therefore, it is necessary to combine the characteristics of the raw ore, the fineness of the material, the energy consumption, and the budget to choose the right calcite powder crushing equipment, and then quote a detailed price.