Gold milling machine is also called wet milling machine and round mile. It is mainly suitable for selecting gold from rock gold (vein gold). The occupancy rate of particle gold is relatively high (natural gold, fissure gold, coated gold, fine-grained gold, particulate gold), which is relatively easy-to-select gold rock ore. And it also suitable for the grinding, pulverizing, and processing operations of copper, silver, quartz, wollastonite and other non-ferrous metals and non-metallic minerals. When selecting gold, the mercury inside the water tank is called the internal mercury method, and when the overflow ore slurry passes through the mixing tank or mercury, it is called the external mercury method. When the gold grinder is used as a gold selection equipment, it can be used alone or with re-selection equipment and floating equipment. Select equipment for combined use.

Wet pan mill features

The gold milling machine mainly through the mixing, rolling, crushing, and rolling of the raw materials to achieve a balanced moisture content, a uniform ratio, and a low air content to improve the molding rate and molding quality. It has the characteristics of high density, good strength, and no pores. Beside, it also is high efficient and energy saving, and has high output. the round mill is used for the recovery of tailings in the iron ore process, so that the ore powder is not lost, so that the effective resources can be fully utilized.

The role of wet pan mill in ore dressing.

The gold rolling machine is mainly composed of power unit, frame, water basin, rolling wheel, rolling plate and other components. The rolling wheel has the function of mixing and mixing pulp while rolling and kneading minerals. After grinding and crushing, the monomer is dissociated. The fine mineral particles are carried to the upper liquid level in the mixed slurry, and discharged through the overflow discharge port set on the water basin, and then enter the next operation process for processing. The coarse minerals settle at the bottom of the grinding pan are continued to grind and crushed until the fineness reaches the standard. The screen set at the discharge port of the water basin (the number of screens should be set reasonably according to the mineral type and sorting requirements), can strictly control the grading particle size to avoid over-crushing or uneven particle size, which creates good conditions for subsequent operations.