Hammer sand crusher is used for crushing various medium hardness and brittle materials. It is used in cement, coal preparation, building materials and other industries. It can crush raw materials of different sizes into uniform finished product particle size. The output of hammer sand crusher is 30 tons per hour. With small size and vertical structure, it is convenient for installation on the construction site. The price and the factors of the capacity of a 30t/h hammer crusher are always asked by customers, and this article answers for you.

Introduction of the models of hammer crusher

Hammer sand crusher is a kind of equipment with three-stage crushing effect. It uses the high-speed rotation inside the machine to drive the hammer head to generate a strong impact force to crush the material. It is an energy-saving sand making equipment.

The hammer sand making machine has a relatively simple structure and a large crushing ratio, which can make the material more fully broken. In the sand making production, a single machine can be equipped with a set of sand making production lines, and one machine can be used for multiple purposes, eliminating the need for coarse crushing and fine crushing. The finished product specifications can be adjusted to the required particle size according to customer requirements, and the structure is sealed, which solves the problem of dust pollution and ash leakage in the crushing workshop.

The recommended model of hammer crusher with a capacity of 30 tons is PC 800×600 and PC 1000×800. The processing capacities are respectively 10-40t/h and 15-50t/h, which can meet the production requirements of production. The use rate of these two models is relatively high in the sand and gravel field. Among the many sand making equipment, not only the output is up to the standard, but the body is more wear-resistant.

Factors of the processing capacity of the hammer sander

The processing capacity of the hammer sander is determined by the equipment model, the characteristics of the processing raw materials, and the user's operation method.

The cavity shape of the hammer sand making machine passes through the working gap formed by the crushing wall and the rolling mortar wall. The quality of the cavity shape arrangement will be directly related to the work efficiency, appearance and energy consumption, and the particle size and shape of the crushed material. There are major causes, so there are many reasons for determining the processing capacity of the hammer sander. It is recommended that if you want to increase the output of the equipment, you must operate according to the performance of the equipment in your province.

1. Feed particle size

The feed particle size of the 30t/h hammer sand grinder needs to be controlled at 15-20CM. If the feed particle size is too large, it may be stuck on the first layer of the rotor. If the raw materials are too large or different in size, it is recommended to purchase a jaw crusher to perform rough processing first, and then carry out the sand making operation, so as to ensure that the processing capacity will not be reduced.

2. Characteristics of processing raw materials

Hammer sand blasting machine is suitable for crushing and sand making of stones with medium hardness. In the case of multi-grinding, the processing capacity will also be reduced, so suitable processing raw materials can be selected according to the characteristics of the hammer crusher.

3. Operation method

The number of oscillations of the crushing chamber in the hammer sand making machine is also directly related to the processing capacity. If the number of oscillations is increased, the actual feed compression share of each crushing layer in the crushing chamber will be injected, and the properties of the crushed materials will also vary, and the modification has strengthened the discharge granularity. If it is the swing stroke of the hammer sand making machine, the feed compression ratio of each crushing layer of the crushing chamber will be reduced, and the performance of the crushed material will also decrease, so it is necessary to operate according to the equipment and high-yield effects can be achieved by working with nature.

How much is a 30t/h hammer sand crusher machine?

Compared with other sand making equipment, the price of hammer sand crusher is more favorable, especially the price of hammer crusher with a production capacity of 30 tons can basically be bought for tens of thousands USD.

However, due to the different types of hammer sand blasting machine manufacturers, there is a big difference in the production cost, so there is also a deviation in the price positioning of the hammer sand blasting machine. For example, some middlemen increase the price of equipment in the province in order to make profits. The price of the hammer sander in the market will also be controlled by the user demand.