Refractory bricks are an indispensable material for industrial construction, especially steel plants, cement plants, and electric power plants. As long as there is a high temperature, they must have their posts. However, the treatment of waste refractory bricks at the end of the life cycle has become the enterprise’s Big problem, today we will analyze what equipment is needed for the crushing and utilization of used refractory bricks? What is the recycling value after crushing? What equipment is used for crushing waste refractory bricks?

Taking into account that it is a waste refractory brick material, the composition is more complicated, it is recommended to use a jaw crusher + roller crusher for processing.

Jaw crusher-processing capacity is 1~1120t/h

This machine is suitable for various soft and hard materials with a compressive strength of not more than 350MPa. The discharge fineness is relatively large. It is often used as a primary breaking equipment for the production line and is widely used. There are various discharge adjustment methods, including pad adjustment, wedge adjustment and hydraulic cylinders. It has hydraulic protection device, which can can be protected even overload, so its production is safer and more reliable.

Double roller crusher-processing capacity is 5~200t/h

This equipment is suitable for processing brittle and tough materials for medium and fine crushing operations. The internal spring plays a protective role. When non-broken objects fall between the two rollers, the bearing can be pushed to compress the spring, resulting in a large gap and unbreakable material passes through to prevent damage to the machine. And the output granularity is adjustable, which can be achieved by adjusting the wedge or gasket between the two rollers For the treatment of waste bricks, continuous crushing operations are often used. It is recommended that you combine the characteristics of materials and crushing equipment and use corresponding equipment for supporting use, such as jaw crushers, roller crushers, and screening machines. The screening refers to the crushed materials pass through a certain size of sieve to separate materials of different particle sizes.

Understand the use of waste refractory bricks, let you know more about refractory materials.

Refractory bricks are a non-renewable resource. Reusing waste refractory bricks is of great significance to the development of circular economy in the refractory industry. Treating them through certain technical means not only improves the utilization rate, but also reduces environmental pollution. The above mainly introduces the processing equipment, and then this paragraph will introduce you its recycling value in detail.

Application of waste refractory bricks

1. It can replace river sand as fine aggregate.

2. Waste refractory bricks can be used as road materials.

3. After the refractory bricks are discarded, they still have a certain strength and can be used to produce wall materials.

4. Recycled aggregate concrete can be prepared. Compared with natural aggregates, the surface is relatively rough and the friction is greater. However, due to the rough surface of the aggregates, the resistance of mixing and pouring is increased, so the water retention and cohesion are better. There are many materials for waste refractory bricks, and the utilization value of different materials is also different. If the material you want to process is special and the equipment selection is not suitable, you can consult customer service.