Descriptions:

YGM high-pressure suspension roller mill is similar to the Raymond mill, but the grinding device is equipped with high-pressure springs with a pressure of 1000-1500 kgs.

What Is a YGM High-pressure Suspension Roller Mill?

A YGM high-pressure suspension roller mill is a highly efficient grinding mill to produce fine powders. It is suitable for processing and grinding more than 400 kinds of non-flammable and explosive materials with Mohs hardness of less than 9.3 and humidity below 6%, such as quartz, feldspar, barite, fluorite, dolomite, garnet, silicon carbide, bauxite, zircon sand, marble, calcite, iron ore, phosphate rock, coal, ceramics, slag, etc. The particle size of the finished product can be adjusted between 30-425 mesh.

The YGM high-pressure suspension roller mill is similar to the Raymond mill, but the grinding device is equipped with high-pressure springs with a pressure of 1000-1500 kgs. When working, under the action of High-pressure springs and centrifugal force, the grinding roller rolls close to the grinding ring. Under the same conditions, the rolling pressure is 1.2 times higher than Raymond mill and the capacity can be increased by 20%-30%.

What Is YGM High-pressure Suspension Mill Used For?

CFTC YGM high-pressure suspension roller mill is used for grinding and processing a wide range of non-flammable and non-explosive mineral materials. This mill is particularly effective for producing fine powders for various industrial applications. 

• Grinding Powder Plant

• Cement Processing Plant

• Mineral Processing

• Metallurgy Industry

• Building Materials

• Chemical Engineering

• Fine Powder Production

• Paint Industry

• Construction

• Glass and Ceramics

What Are the Features of YGM High-pressure Suspension Mill?

1. The size of final products can be 0.613mm (30 mesh) –0.033mm (425 mesh). Some can reach the fineness of 0.013mm (1000 mesh).

2. Compared with other mills, its capacity increases by 10%-20% under the same power condition.

3. The compression force of rollers to material improves by 800-1200kgf under the force of a High-pressure spring.

4. High-pressure Suspension Mill meets the requirement of the national dust-dump standard.

5. The multi-class seals are adopted to keep the grinding equipment tightly closed.

6. Be energy-efficient, consuming less power, compared to conventional mills while achieving the same output levels.

7. The curved surface shovel with split design, only the blade to be replaced during maintenance.

What Are the Parts of YGM High-pressure Suspension Mill?

The whole equipment of YGM high-pressure suspension roller mill consists of main grinding machine, reducer, analyzer, pipeline device, fan, dust collector, jaw crusher, bucket elevator, electromagnetic vibration feeder, etc. 

Each grinding roller component of the high-pressure suspension roller mill is equipped with a spring, and the spring is equipped with a spring pressure plate, which is connected to the grinding roller hanger through a screw rod.

The YGM high-pressure suspension roller mill has several vulnerable components that are the grinding roller, grinding ring, high-pressure springs, and decelerator. They typically require regular maintenance or replacement.

How Does YGM High-pressure Suspension Mill Work?

When working, under the action of high-pressure spring and centrifugal force, the grinding roller rolls close to the grinding ring, and the shovel scoops up the material and sends it between the grinding rollers and the grinding ring. The grinding rollers roll with the grinding ring to achieve the purpose of grinding and crushing.

After the material is ground, the powder will be separated by the classifier with the circulating air of the blower. The coarse powder will fall back into the grinding chamber for regrinding, and the qualified powder with airflow will enter the cyclone powder collector, be collected, and finally be discharged through a duct as finished products.