The role of each accessory of cone crusher

Cone crusher equipment is a major machine widely used in today's mining crushing industry. The working stability and service life of cone crusher equipment are closely related to its supporting equipment. In the operation of cone crusher equipment, the damage of parts will have a certain adverse effect on the entire processing technology, so it is very necessary to repair and replace them.

The main accessories of this equipment are: crushing wall, mortar wall, bowl-shaped bearing, copper sleeve, spring, etc.

1. The broken wall is also called dynamic drill, which is an important wear-resistant component for impact drill bits. The broken surface of the cone crusher equipment produced by our company is made of a new composite structure, which has the advantages of very strong wear resistance, high cost performance and wide application range. The broken wall of the cone crusher equipment adopts a conical head connected to the conical body, and epoxy is injected between the two. The newly installed or replaced cone crusher equipment must be tightened after 6-8 hours of use. If it is loose, tighten it in time.

2. Another type of mortar wall is called the fixed cone of the cone machine, which is also an important wear-resistant part. When the cone crusher equipment is working, the impact intensity is very large and the frequency is high, and its working performance has a great impact on its work. The cone crusher equipment produced by our company has a high manganese steel plate on the broken surface, which has the advantages of impact resistance, wear resistance, and extrusion resistance, and is durable.

3. Special attention should be paid to the bowl-shaped bearing during installation. Before installation, be sure to clean the oil tank and the dirt in the oil tank, and pay attention to prevent dust and oil wear. The bowl-shaped support bracket must be closely matched with the base, and the lateral contact surface is measured with a caliper to see if it is firm. When the bowl-shaped support is installed, immediately cover the bowl-shaped tile with a lid and then remove it. When installing the spherical support, protect the water inlet pipe, drain, oil retaining ring, etc. to prevent damage during installation.

4. The copper shell of the cone crusher equipment acts as a copper sleeve. Usually, there will be no problem. The cylindrical bearing and the frame are three transitional forms. To avoid the rotation of the bearing, galvanized alloy is added to the upper groove of the bearing and adjusted according to the actual size of the frame; due to long-term use and handling, the cooperative relationship between the crushing equipment will definitely change. If the gap is too large, the casing will break.

5. The function of the spring is to prevent the crusher from being damaged when entering non-crushed objects. Therefore, the pressure of the spring and the crushing force of the crusher are consistent. Under normal circumstances, during the operation of the crusher, the spring is stationary. Only when there is iron falling inside the crusher and the crusher is overloaded, its support sleeve is lifted, resulting in elastic compression.

The above is the role of each accessory of the cone crusher. For the application of the cone crusher, it can be used in combination with the actual situation of the equipment, thereby reducing the maintenance cost of the equipment and improving production efficiency. If you want to know the basic information of other equipment, you can call or contact the CFTC online customer service staff, and we will give you a satisfactory answer to your questions.