Hot search products:

Impact Crusher JC Jaw Crusher Diesel Jaw Crusher Symons Cone Crusher

What are the causes of cone crusher blockage?

Last Updated: 2025-01-09

Cone crusher is a common crushing equipment, which is mainly used for crushing medium hardness and medium viscosity materials. However, in the process of using cone crusher for crushing, you may encounter the problem of blockage. Once blockage occurs, it will not only affect the production efficiency of the equipment, but also increase the maintenance cost of the equipment. Therefore, it is very important to understand the causes of cone crusher blockage and preventive measures. This article will discuss the causes of cone crusher blockage from the following aspects:

西蒙斯圆锥187.jpg

1. Too much or too fast feed. When the feed amount is too large or the feed speed is too fast, the crushing chamber may be filled with materials, causing the cone crusher to block. Therefore, when performing crushing operations, it is necessary to reasonably control the feed amount and feed speed to avoid excessive or too fast feeding.

2. The crushing cavity type is not suitable. The crushing cavity type is one of the important factors affecting the output of the cone crusher. Different crushing cavity types are suitable for different material properties and process requirements. If the crushing cavity type is not suitable, the processing capacity of the cone crusher will be insufficient and it will be difficult to meet production needs; if the crushing cavity type is too large or too small, the load of the cone crusher will be too large or too small, which will easily cause the equipment to get stuck and block the material. Therefore, when using a cone crusher, it is necessary to reasonably configure the crushing cavity type according to factors such as the material properties, process requirements and equipment specifications.

3. Debris accumulated inside the crushing cavity. Debris inside the crushing cavity includes stone fragments, iron filings, impact plates, etc. Excessive accumulation will affect the flow of materials in the crushing cavity and may be captured when crushing materials, causing the crusher to block the material. Therefore, when using a cone crusher, the equipment needs to be cleaned regularly.

4. Insufficient motor power. Motor power is one of the important factors that determine the production capacity of a cone crusher. In the actual production process, it is necessary to reasonably configure the motor power according to factors such as the material properties, process requirements and equipment specifications. If the motor power is insufficient, the processing capacity of the cone crusher will be insufficient and it will be difficult to meet production needs; if the motor power is too large, it will increase the energy consumption and maintenance cost of the equipment. Therefore, when using a cone crusher, it is necessary to reasonably configure the motor power according to the actual situation.

西蒙斯圆锥破生产线51.jpg

The above are the reasons for the blockage of the cone crusher. For the application of the cone crusher, it can be used in combination with the actual situation of the equipment, thereby reducing the maintenance cost of the equipment and improving production efficiency. If you want to know the basic information of other equipment, you can call or contact the CFTC online customer service staff, and we will give you a satisfactory answer to your questions.

Request A Quote