How to install a mining vibrating screen

The mining vibrating screen is a screening equipment widely used in mining, metallurgy, building materials, electricity, chemical industry and other industries. It has the advantages of large processing capacity, high efficiency, low energy consumption and low noise. This article will introduce in detail how to install the mining vibrating screen to help you better understand and use this equipment.

1. Preparation stage

Before installing the vibrating screen, we need to make full preparations. First of all, we need to understand the principle, performance and operation requirements of the vibrating screen in order to install and use it correctly. Secondly, check whether the accessories of the vibrating screen are complete and check whether the drawings and the actual objects are consistent. If there are any differences, contact the manufacturer in time to resolve them. Finally, ensure that the installation site is flat, clean, and has enough space.

2. Foundation acceptance and elevation control

According to the requirements of the installation drawings, the foundation is inspected. Check whether the flatness, levelness and elevation of the foundation meet the requirements. If the foundation does not meet the requirements, it should be handled in time. In addition, the installation elevation should be determined according to the requirements of the drawings, and the foundation should be marked.

3. Hoisting in place

Use appropriate lifting equipment to put the vibrating screen in place as required. During the hoisting process, care should be taken to protect the parts of the vibrating screen from damage. After it is in place, check whether the relative position of the vibrating screen and the foundation meets the requirements.

4. Connection and fixation

Connect and fix the vibrating screen to the foundation according to the requirements of the installation drawing. Usually, anchor bolts and pads are used for fixing. During the fixing process, attention should be paid to adjusting the horizontality and elevation of the vibrating screen.

5. Piping and electrical connection

According to the requirements of the equipment technical documents, connect the inlet and outlet, cleaning port, etc. of the vibrating screen with the corresponding pipeline. At the same time, according to the electrical connection diagram, connect the power cord of the vibrating screen with the corresponding power supply.

6. Trial operation and adjustment

After completing the above steps, a trial operation should be carried out. During the trial operation, check whether the various performance indicators of the vibrating screen meet the requirements, such as running stability, amplitude and noise. If there are any problems, adjustments should be made in time.

The above are the steps for installing the mining vibrating screen. For the application of the mining vibrating screen, it can be used in combination with the actual situation of the equipment, thereby reducing the maintenance cost of the equipment and improving production efficiency. If you want to know the basic information of other equipment, you can call or contact the CFTC online customer service staff, and we will give you a satisfactory answer to your questions.