What impact will the feed size of the crusher have on the equipment?

Common crushing equipment in the production line of sand and gravel aggregates mainly includes jaw crusher, impact crusher, impact crusher and cone crusher and other sand and gravel crushing and processing equipment. The feed size of the crusher is of great significance to the equipment. Each crusher has its own standard feed size. If the feed size does not meet the feed standard of the crusher, what problems will the equipment have? The following will explain to you what impact the feed size will have on the equipment.

1. If the feed size of the crusher is too large, it will cause serious damage to the equipment. Therefore, the feed size must meet the feed standard of the crushing equipment itself. When the material fed to the crusher is too large, whether it is soft material or hard material, it will cause different degrees of damage to the equipment. At the same time, the feed size is too large and the equipment will wear faster.

2. The feed port size of each model and specification of sand and gravel crusher is standard, so the feed size must be clearly specified. When the feed size is too large, it will cause the material to get stuck. The parts of the sand and gravel crusher are damaged. When the material is stuck, the hammer of the crusher does not stop working. The hammer and the crushing roller are less in contact with the material, and the damage of the wearing parts of the same material will be accelerated. Large pieces of sand and gravel and other materials enter the sand and gravel crusher equipment. Under the same mass, the larger the particle size of the material, the greater the grinding difficulty, and the damage to the wearing parts of the crusher is also serious. Excessive material will increase the operation of the sand and gravel crusher, and then cause fatigue to the crusher, and further increase the failure rate of the crusher.

3. Large pieces of stone enter the crusher. Under the same mass, the larger the particle size of the material, the greater the grinding difficulty, and the more serious the damage to the consumable parts of the crusher. Excessive stone will increase the operating pressure of the crusher, easily cause fatigue of the equipment, and increase the failure rate of the equipment. Under the same output operation intensity, excessive particle size of the feed will shorten the service life of the crusher accessories, greatly reducing the service life of the equipment.

4. If the size of your material exceeds the standard size of the crusher, a deep-cavity jaw crusher should be used for initial crushing. The material meets the feed size of the crusher and then exceeds the equipment. In this way, the damage to the equipment will be small and the work efficiency will be greatly improved. Production and manufacturing distribution according to the feed size indicated on the equipment is a prerequisite and guarantee for the work efficiency, output and service life of the production equipment. Regular, reliable and correct production, control, orderly planning and distribution and timely maintenance.

5. When the equipment is crushing, the safe operation of the equipment is the key. We must not only ensure the operation of the equipment itself, but also ensure the safety of the operators and the workplace. Safe production is also the guarantee of our production efficiency and the cost of finished products. Because of this, we should pay more attention to the feed size during the crushing process.

The above is the impact of the feed size of the crusher on the equipment. As for how to control the feed size of the crusher, it can be used in combination with the actual situation of the equipment, thereby reducing the maintenance cost of the equipment and improving production efficiency. If you want to know the basic information of other equipment, you can call or contact the CFTC online customer service staff, and we will give you a satisfactory answer to your questions.