Precautions for starting and running the impact crusher

The impact crusher is a common crushing equipment, widely used in various industries such as construction, water conservancy, highways, railways, etc. The installation and start-up of the impact crusher are very important for the normal operation of the equipment. This article introduces the starting precautions of the impact crusher. Before starting the impact crusher, please be sure to follow the following precautions:

1. Make sure that the power supply is connected and working normally, and the voltage is stable.

2. Check whether there are foreign objects in the crushing chamber. If so, please remove them immediately.

3. Confirm whether the various components of the crusher are firmly installed and the screws are tightened.

4. Check the tightness of the drive belt to ensure that it is properly tensioned.

5. Before starting, make sure that all safety protection devices are in place, such as protective covers, safety switches, etc.

6. According to the requirements of the operating manual, start the crusher step by step, observe its operation, and if there is any abnormality, stop running immediately and check.

7. During the operation of the crusher, always pay attention to the material situation in the crushing chamber to avoid overload.

8. During operation, it is strictly forbidden to put your hands or other body parts into the crusher to avoid injury.

9. Regularly maintain the crusher to keep it in good working condition.

The above are the precautions for starting and running the impact crusher. For how to start and run the impact crusher, you can use it in combination with the actual situation of the equipment, so as to reduce the maintenance cost of the equipment and improve production efficiency. If you want to know the basic information of other equipment, you can call or contact the CFTC online customer service staff, and we will give you a satisfactory answer to your questions.